Need a little help with part numbers

A place for general Nuffield questions and chat
Post Reply
mike.l
Senior Member
Posts: 263
Joined: Fri Mar 30, 2018 10:29 pm
Location: london ontario
Canada

Need a little help with part numbers

Post by mike.l » Wed Jun 09, 2021 11:55 pm

Hi i need to rebuild my hydraulic pump its on a later 1060 tractor and is supposed to have the latter dowty pump which has 2600 psi I ordered parts from charnleys and finally got them i took the pump apart and discovered i had the wrong parts in the workshop manual it shows the o rings as a assembly that is what i need the whole assembly.. but i can find no reference to them in the parts book and need a part number to be able to tell charnleys what i need can anyone help i read the manuals on here and its not in there either will post a picture of what i need thanks mike
Image



mike.l
Senior Member
Posts: 263
Joined: Fri Mar 30, 2018 10:29 pm
Location: london ontario
Canada

Re: Need a little help with part numbers

Post by mike.l » Wed Jun 09, 2021 11:59 pm

I made the picture to small so here goes again
Image

jwham
Posts: 6
Joined: Sat Apr 04, 2020 11:33 am
Location: Listowel. Ont.
Canada

Re: Need a little help with part numbers

Post by jwham » Mon Jun 21, 2021 1:09 am

Here is a picture out of a parts manual of 10/60 for a 2000 psi pump and 2500 psi pump. First pic is illustration and 2nd pic is p/n and illustration #. Jeff
Hope the pics load ok
Image

Image

mike.l
Senior Member
Posts: 263
Joined: Fri Mar 30, 2018 10:29 pm
Location: london ontario
Canada

Re: Need a little help with part numbers

Post by mike.l » Thu Jun 24, 2021 3:11 pm

thanks guy But i Have both of those drawings in my books .But the odball pump is 2600 psi i guess it was droped very soon after as the 465 had a different pump again

Post Reply