262 Clutch

A place for general Leyland tractor questions and chat
Post Reply
foxwood
Posts: 2
Joined: Mon Jan 20, 2020 10:24 pm
Great Britain

262 Clutch

Post by foxwood » Sun Nov 22, 2020 6:25 pm

Hi I have a 262 with a slipping clutch. I have stripped it down to the clutch but the whole clutch is stuck to the flywheel just seems to be rusted in, any ideas how to free it.



X344chap
Posts: 48
Joined: Wed May 09, 2018 12:18 am

Re: 262 Clutch

Post by X344chap » Tue Dec 29, 2020 3:09 pm

Do you mean the clutch drive plate is stuck to the flywheel after you have taken the pressure plate off?

foxwood
Posts: 2
Joined: Mon Jan 20, 2020 10:24 pm
Great Britain

Re: 262 Clutch

Post by foxwood » Sun Jan 10, 2021 10:19 pm

Hi the pressure plate is stuck to the flywheel so the complete clutch won't come off.

mike.l
Posts: 232
Joined: Fri Mar 30, 2018 10:29 pm
Location: london ontario
Canada

Re: 262 Clutch

Post by mike.l » Sun Jan 10, 2021 11:51 pm

Hi You should be able to get the clutch pressure plate off then its just the clutch plate to force off the flywheel i would go back a stage have you got the throw out bearing loose and the clutch forks removed and all the outer ring of bolts removed i think its every 3rd bolt is a long one and has to be removed screw the short ones back in with all removed you should be able to put a great shock load on the clutch face by hammering on a block of wood in all directions mike

Post Reply