injection pump

A place for general Marshall questions and chat
Post Reply
Balepack
Posts: 2
Joined: Mon Apr 02, 2018 12:09 am
Location: Uk
Great Britain

injection pump

Post by Balepack »

Hi
I'm struggling to get the injection pump off my 904 Marshall. It has the inline injection pump.
I have taken off the 3 bolts holding it on & the cover at the front with the 3 allen bolts.
The pump is lose but it will not come off.


Dixie normous
Senior Member
Posts: 316
Joined: Mon Apr 01, 2019 9:13 pm
Great Britain

Re: injection pump

Post by Dixie normous »

Have you removed the gear from the front of the pump?
Black smoke dont mean its broke
Rick Cobley
Senior Member
Posts: 576
Joined: Fri Mar 30, 2018 9:32 pm
Location: Leicestershire, UK
Contact:
Great Britain

Re: injection pump

Post by Rick Cobley »

Hi, Just to be clear we are talking about a Minimec pump?

Three nuts holding pump to timing case.

Four bolts holding cover on front of timing case.

Three Allen screws holding gear to pump shaft.

If you have removed all the above it should be free to remove.

Gear may be stuck on the taper on the front of the pump shaft, a tap from a hammer somewhere may be required!

Regards Rick Cobley
Balepack
Posts: 2
Joined: Mon Apr 02, 2018 12:09 am
Location: Uk
Great Britain

Re: injection pump

Post by Balepack »

Hi
Have removed all the bolts
Looks like I'm going to remove the rad So I can have a direct hit on it
Post Reply