Clutch question

A place for general Nuffield questions and chat
Post Reply
Lois valvasori
Posts: 4
Joined: Sun Jul 07, 2024 4:48 pm
Canada

Clutch question

Post by Lois valvasori »

I just bought a nuffield 1060 farm tractor BMC diesel
trying to get the forks out to get the trans shaft and clutch out any help would be greatly appreciated


mike.l
Senior Member
Posts: 401
Joined: Fri Mar 30, 2018 10:29 pm
Location: london ontario
Canada

Re: Clutch question

Post by mike.l »

HI Apart from the screw in the centre there is a allen head screw in the frame that has to be removed as well Mike
Lois valvasori
Posts: 4
Joined: Sun Jul 07, 2024 4:48 pm
Canada

Re: Clutch question

Post by Lois valvasori »

I saw,the Allen screw but I can't move it?
Lois valvasori
Posts: 4
Joined: Sun Jul 07, 2024 4:48 pm
Canada

Re: Clutch question

Post by Lois valvasori »

Is there anywhere to watch a video how how to remove the clutch ?
mike.l
Senior Member
Posts: 401
Joined: Fri Mar 30, 2018 10:29 pm
Location: london ontario
Canada

Re: Clutch question

Post by mike.l »

HI I do not know of a video but lots of info on here including the workshop manual . You do not need to remove the cross shaft to get the clutch out just undo the centre and then it will twist out of your way . Pull the brass bushings on the throw out bearing ends will let you to disconnect the forks the workshop manual will explain all steps to get this job done mike
Lois valvasori
Posts: 4
Joined: Sun Jul 07, 2024 4:48 pm
Canada

Re: Clutch question

Post by Lois valvasori »

Where can I purchase a workshop manuel?
BHFnovice
Posts: 4
Joined: Wed Apr 24, 2024 1:44 pm
Great Britain

Re: Clutch question

Post by BHFnovice »

Hi Lois. Go to Board Index > Downloads > Workshop Manuals on this site. David.
Post Reply